Apparatus is supplying to separate grabbed one by one to a straight-loading has been board
Feature
● sort setup in only the substrate is set to set the conveyor width is completed.
By registering the substrate width ●, it is possible to set even if the width of the substrate are different in the next setup.
● to grab the substrate by chucking type, will not be affected by the through-hole.
● It can be supplied without having to contact the surface of the substrate.
● In order to set the substrate from a height of 1000mm, it has improved workability.
By connecting to the magazine loader ●, it is possible to transport to pass through the already mounted board.
Specifications
| Model | NCL-250 |
|---|---|
| quality | 280kg |
| Applied substrate size | L 80mm × W 50mm ～ L 330mm × W 250mm |
| Substrate supply number | Maximum input number 400 sheets (in the case of t = 1.6), chucking stage 200 sheets and introduction stage 200 sheets |
| The substrate mass | 300g or less |
| Substrate thickness | 1.0mm ～ 3.0mm |
| Substrate supply tact | 9 seconds |
| Conveyor width adjustment | Automatic width adjustment as standard |
| safety cover | Cover for the purpose of safety and dust-proof standard equipment |
| using electric | AC100V ± 10% 3P power cord with 5m with earth |
| Power consumption | 0.4kV |
| Use air source | Air consumption: 10Nℓ / min · Pressure: 0.5 ± 0.1 MPa |
| Paint color | white |
| control | By a programmable controller |