>

【nagaoka】NCXS-250

【nagaoka】アルティメット クリーニング装置 NCXS-250

And dust adhering to the substrate was cleaned by the brush and the adhesive roller

Feature

● Clean the end face and the front and back surfaces of the substrate.
● end surface + surface / back surface of the substrate will be cleaned by the brush.
● For fine dust, and then removed by the adhesive roller.
● depending on the model read, operation mode, the conveyor width, to switch the conditions such as the height of the brush.
● operation mode can be set to any.

Specifications

odelNCXS-250
quality250kg
Applied substrate sizeL 80mm~W 50mm ~ L 330mm~W 250mm
Conveyor width adjustmentAutomatic width adjustment
titleNumeric value
titleNumeric value
titleNumeric value
titleNumeric value
using electricAC100V ± 10% 3P power cord with 5m with earth
Power consumption1.0kVA
Use air sourceAir consumption: 100N ℓ / min Pressure: 0.5 ± 0.1 MPa
End face cleaningTo remove the dust by the rotation of the brush and then sucked by the dust collector
Surface / bottom surface cleaningAspirate dust collector to remove dust by the rotation of the brush to remove fine dust by the adhesive roller
Paint colorwhite

PAGE TOP