And dust adhering to the substrate was cleaned by the brush and the adhesive roller
- It is a full-featured substrate cleaning apparatus according to the up and down brush + upper and lower rollers.
- After cleaning with a brush, also to remove very fine dust by the roller.
- brush and roller can height setting a numerical value input by the touch panel operation.
- You can pass operation of the mounting board to the top / bottom surface both.
- Ionizer to the substrate carry-out side has been standard equipment on the top / bottom surface.
Specifications
| Model | NCX-250 |
|---|---|
| Quality | 230kg |
| Applied substrate size | L 80mm×W 50mm ～ L 330mm×W 250mm |
| Board width adjustment | Manual adjustment by crank handle (removable) (with digital indicator) |
| Using electric | AC100V ± 10% 3P power cord with 5m with earth |
| Power consumption | Maximum: 0.5kVA |
| Use pneumatic | 0.5 ± 0.1MPa |
| Consumption air amount | 100N ℓ / min |
| Static electricity removal device | Ionizer has been installed on the top / bottom surface of the substrate carry-out side. |
| Rotary brush structure | By the rotation of the brush, and the dust-collecting by the dust collector to remove the dust of the substrate. ● You can rotate the number of brush is set by the touch panel. ● Comes with a brush for the brush and the lower surface of the upper-surface. ● Brush for the upper surface, set the height numeric input by the thickness of the substrate. ● According to the operating mode, the brush unit is responsible for up / down automatically. |
| Brush material | It uses organic conductive fibers obtained by chemically bonding the copper sulfide acrylic fiber. |
| Air blow mechanism | Slit nozzle type by air ejected from the gap of 30μm, to remove the dust and debris that enters into the through-hole. |
| Dust collector size (another place) | W 326×D 350×H 450mm |