>

【ETC】Vacuum Reflow Equipment RNV/RSV series

ETC】Vacuum Reflow Equipment

Features

  • Significantly decreased the void
    With combine the solder, the void space can be saved maximum less than 1%.Improved the electrical characteristics and the connection reliability of the product.
  • In-line type for mass production
    Min. 30 sec tact speed time for mass productions.
  • Convection heating system
    One time soldering and vacuum reflow on the double face PCB, the void can be decreased.The metal PCB with the heat sink of aluminum can be solder.The temperature variations less than the hot plate heating system, the reflow time can be shorten.
  • Ultra low power consumption to promote saving energy.
  • Large-capacity flux collection unit to increase operation hours
    The cleaning flux frequency several times a year.162 model is excellent collection performance.
  • This equipment can use for N2 Reflow Equipment.

Specification

Model No.RNV152M / RSV152M / RNV162M
-512-WD-512-LE-612-WD-612-LE
Heating Zone56
Vacuum Zone1
Cooling Zone2
PowerAC200V 3Φ
Start up PowerMax. 36kW (39.5kW)Max. 43kW (46.8kW)
Normal PowerApprox. 8kW (Approx. 12.5kW)Approx. 10kW (Approx. 14.7kW)
Heating TemperatureRNV:Max 280℃ RSV:Max 350℃
Vacuum1 ~ 12kPa
N2 ConsumptionApprox. 24m3/hApprox. 18 ~ 24m3/hApprox. 24m3/hApprox. 18 ~ 24m3/h
DimensionLength5,406mm
(5,151mm)
5,871mm
(5,951mm)
5,741mm
(5,486mm)
6,286mm
(6,366mm)
Width1,350mm (1,510mm)
Height1,500mm
PCBWidth100 ~ 330mm100 ~ 250mm100 ~ 330mm100 ~ 250mm
Length100 ~ 250mm100 ~ 330mm100 ~ 250mm100 ~ 330mm
Component HeightUpper:30mm  Lower:30mm (from chain top)
Flux CollectionStandard Equipment:Large-capacity flux collection unit by air-cooled. (Large-capacity flux collection unit by water-cooled.)

※( )is for RNV162M model

PAGE TOP