PCB Cleaners（Inline Type）
UC-250M-CV takes all the features of the UC-250M, and adds a dual cleaning feature using a combination of a brush roller with the silicone/adhesive cleaning rollers.
Features
- The combination dual dust removal system assures better results than a single brush or adhesive roller system.
- Can set multiple forward and reverse conveyor modes.
- Multiple auto passes ensures more effective micro-dust removal.
- Use the touch panel to select the operation modes (turn ON/OFF brush or rollers).
Specifications (UC-250M-CV)
| Cleaning Side | Top-Side |
|---|---|
| Cleaning Method | Silicone Rollers & Brush-Type |
| Rollers | 2 Silicone 1 Adhesive Tape Roller |
| PCB Size | W: 50 ~ 250mm L: 100 ~ 330mm T: 0.5 ~ 2.0 mm |
| Conveyor Height | 900ｍｍ ± 25ｍｍ |
| PCB Flow Direction | R -> L or L -> R |
| Conveyor Fixed Side | Front or Rear |
| Conveyor Width Adjustment | Manual (standard) Auto (optional) |
| Conveyor Speed | Adjustable 0 ~ 9 m/min. |
| Ionizer | Internal w/ air blower |
| PCB Anti-Warp | Inside of conveyor |
| PCB Anti-Warp Adjustment | Manual |
| PCB Counter | 0 ~ 9999, Warning Buzzer, Signal Tower |
| Power Supply | AC 100-120V 50/60Hz 300VA |
| Brush Unit | Rotating brush & Vacuum |
| Air Supply | Dry Compressed Air 0.5Mpa |
| Options | – Auto Conveyor Width Adjustment. – 3 Color Signal Tower. – Custom Paint. – Large PCB System(400mm PCB width) – X Large PCB System(460mm PCB width) – Top & Bottom Cleaning System. |
* Specifications subject to change without notice.